Why is AS 2047 mandatory for importing windows into Australia?

The National Construction Code (NCC) and Building Code of Australia (BCA) mandate that all external windows and glazed doors meet AS 2047 testing standards. Building certifiers require verified compliance certificates (such as our StandardsMark Licence SMK41678) before signing off on occupancy or building approvals.

What glass certification is required under Australian Standards?

All glass in windows and doors must comply with AS 1288 (Selection and installation of glass in buildings) and AS/NZS 2208 (Safety glazing materials). JZZ1 glass is certified under CSi Licence 7632 with permanent laser or ceramic safety stamps on every toughened and laminated panel.

What wind pressure levels are JZZ1 AS 2047 windows tested to?

Our MD75S tilt-and-turn system is certified to 4000 Pa Ultimate Limit State (ULS) wind pressure, 1600 Pa Serviceability Limit State (SLS), and 600 Pa water penetration resistance. The MD76A awning system is certified to 3000 Pa ULS and 200 Pa water penetration resistance.

How does JZZ1 pack windows for ocean shipment to Australian ports?

We utilize fumigated ISPM 15 compliant plywood crates with heavy steel strapping, corner edge protectors, waterproof plastic wrap, and moisture-absorbing desiccant packs. Crates are delivered direct to Port of Sydney, Port of Melbourne, Brisbane Port, or Fremantle.

Home / Australia & New Zealand Projects

StandardsMark Licence SMK41678 · CSi Licence 7632

AS 2047 & AS/NZS 2208 Certified Windows & Doors for Australian Projects

Direct factory manufacturing for Australian builders, commercial developers, and importers: verified StandardsMark Licence SMK41678 by Intertek SAI Global, CSi safety glazing certification, and full National Construction Code (NCC / BCA) compliance.

Australian Standard Compliance Summary

Engineering & Performance Baseline

Tested by accredited NATA laboratory apparatus in accordance with AS 4420 methods, ready for Australian Building Certifier and Form 15 sign-off.

Window Standard: AS 2047-2014 (Licence SMK41678)
Safety Glazing: AS/NZS 2208:1996 (Licence 7632)
Peak Design Wind (ULS): 4000 Pa (MD75S) / 3000 Pa (MD76A)
Water Penetration: 600 Pa (MD75S) / 200 Pa (MD76A)
Air Infiltration: Rated Low (Air-conditioned building ready)
Ocean Logistics: Direct to Sydney, Melbourne, Brisbane & Fremantle

Third-Party Independent Verification

Verified Australian Licences & JAS-ANZ Accreditations

Australian building surveyors require traceable licence documents. Review our official Intertek SAI Global and CSi certificates below:

View All Factory Certificates →

🔍 Expand Licence

AS 2047 StandardsMark

StandardsMark Licence

Licence No.SMK41678
AuditorIntertek SAI Global
AccreditationJAS-ANZ System
StandardAS 2047-2014
Expiry29 April 2030

AS 2047 Model Schedule MD75S and MD76A test ratings

🔍 Expand Schedule

AS 2047 Schedule

Model Schedule SMK41678

MD75S Tilt & TurnULS 4000Pa / Water 600Pa
MD76A AwningULS 3000Pa / Water 200Pa
Air RatingLow (Both Systems)
Tested Sizes1800H × 1200W / 1500H × 1800W
ComplianceNCC / AS 4055 N1–N5

AS/NZS 2208 Safety Glazing Certificate CSi PAS-Mark

🔍 Expand Glass Certificate

AS/NZS 2208 Safety Glass

CSi PAS-Mark Licence 7632

Licence No.CSi Lic No. 7632
AuditorCSi Certification Solutions
RecognitionJAS-ANZ & IAF MLA
StandardAS/NZS 2208:1996
SecurityProtected Edition

AS 2047 Certified Fenestration Schedule

Model ID	System Type	Max Size (H × W)	SLS Design Wind	ULS Structural Wind	Water Penetration	Air Rating	Australian Code Fit
MD75S	Tilt & Turn Window / Architectural Aluminium Window	1800mm × 1200mm	1600 Pa	4000 Pa	600 Pa	Low	Residential N1–N5, Cyclonic C1–C2; High-rise exposed coastal
MD76A	Awning Window + Fixed Lite Combination	1500mm × 1800mm	800 Pa	3000 Pa	200 Pa	Low	Suburban housing N1–N3; Multi-unit residential & townhouses

National Construction Code (NCC)

NCC & BCA Compliance Guide

Importing windows into Australia requires strict alignment with Australian building regulations. Here is how JZZ1 systems meet the technical expectations of Australian certifiers:

AS 4055 Wind Loads for Housing: Certified ratings up to 4000 Pa ULS cover housing wind classifications N1 to N5, and non-cyclonic high wind zones.
AS 1288 Glazing Code: Toughened or laminated safety glass installed in all critical human-impact zones (doors, side panels, low-sill windows <500mm).
Bushfire Attack Level (BAL): Systems compatible with BAL-12.5 up to BAL-40 fire ratings using toughened glass and stainless steel flyscreens.
Energy Efficiency & WERS: Double glazed argon units with warm-edge spacers achieving total window U-values down to 1.5–1.9 W/(m²·K).

Factory-to-Jobsite Supply Chain

Export Logistics & Timber Crating

Overseas sea transit across the Pacific requires heavy-duty protection so that products arrive plumb, square, and ready for installation:

ISPM 15 Fumigated Crates: Steel-banded plywood crates compliant with Australian Department of Agriculture biosecurity rules.
Vertical Glass Transport: Glass panels and assembled sashes packed vertically on A-frames to prevent in-transit cracking.
Moisture & Corrosion Defense: Multi-layer PE foam, corner edge bumpers, and industrial desiccant bags inside sealed containers.
Clear Jobsite Labeling: Every crate and window unit labeled with your project level, room number, and window schedule ID (e.g. W01, W02).

Popular Window & Door Configurations for Australian Projects

Designed to fit modern Australian architectural styles—from coastal Hampton villas to minimalist urban townhouses:

MD75S Tilt & Turn

Dual-action European hardware with multi-point perimeter locking. Micro-ventilation tilt plus inward swing for easy cleaning.

ULS 4000 Pa · Water 600 Pa

MD76A Awning Windows

Top-hinged projecting sashes combined with fixed picture windows. Compatible with truth chainwinders or cam latches.

ULS 3000 Pa · Water 200 Pa

Heavy-Duty Sliding & Stacking Doors

2-track, 3-track, and 4-track cavity stacking layouts with recessed flush sills, heavy stainless rollers, and mohair weatherseals.

Large Openings · Alfresco Living

Bi-fold / Accordion Doors

Top-hung heavy-duty folding doors connecting indoor living to outdoor patios and gardens. Stainless steel bogie wheel running gear.

3-Panel to 8-Panel Layouts

Request an Australian Project Window & Door Quote (24h Turnaround)

Send your architectural floor plan, elevation PDF, or Window Schedule. Our bilingual facade engineers provide detailed CAD layouts, price breakdowns, and AS 2047 compliance paperwork within 24 hours.